Raspberry Pi Setup

Posted:  2017-05-03 | Category: Tech


Mmmm Pi

By now everybody has at least of the Raspberry Pi. It’s an affordable (~£30) little computer designed to enable anybody to learn to code and build projects. It has become a great hit in education and there have been some incredible uses from drones to (mini)supercomputers. Most people however seem to use it as a media server (based on people I know).

I actually won my first Pi. My team was voted the regional winner in our category for the 2016 NASA Space Apps Challenge. The prize was a Raspberry Pi 3, which has some advantages over previous versions - namely a more powerful CPU, wireless LAN (Wifi) and bluetooth.

There were some good intentions to build a drone, and I spent a long time looking at other people’s projects. In the end my Pi sat on my desk collecting dust. Finally I decided I was going to do two things with it, first I was going to use it to run my own VPN, and second I wanted to set up my mail server on it. I have decided to use Raspbian.

Raspbian?! Yes, as some of you may know I am not a fan of the Debian based distros. I tend to choose Arch Linux or Fedora. As a Linux engineer my work is saturated with Red Hat so it’s good for me to know Fedora.
So Rasbian was not my first choice, but it is the choice that worked out of the box. I had some issues installing Arch Linux ARM, and post installation issues with Fedora ARM.
As you’ll see later Raspbian installs quickly and with no issues. This meant I could move on to the fun bit instead of fault finding.


VPwhat?

A VPN is a Virtual Private Network. It allows you to connect to your own ‘private’ network through any other ‘public’ network securely. If you imagine you home network is your private network, if you go to a friends house you can connect to their wifi (public network). If you then connect to you VPN everything you do is being tunneled through your own private network.

The reasons for this are primarily security. By tunnelling your network activity through your VPN then you can be safe from any monitoring on the public network and even the ISP. Another advantage is that the VPN is basically an extension of your home network, which means you can access all the devices and files you have at home.

VPNs are used extensively by corporations so their employees can access the company network from anywhere in the world. They are also used by people who travel alot and are therefore connecting to many different public networks.


Mail electronically

Some of you may have read my first post about DeGooglefying (yes it’s a word) my life. As part of this transition I moved to using my own domain for emails, and I though the Pi would be a great little mail server.


# Raspbian install

Before we can set up our VPN we need to put an OS on the Pi. As mentioned above I have opted for Raspbian. At the time of writing the stable release is ‘Jessie’, I chose the Lite version as I don’t need a desktop for my uses.

After downloading the zip archive extract the image file. If you’re using Windows you will need to use an application such as Etcher to write the image file to an SD card, which will be used in the Pi. For this guide I’m using Linux, so I can use the dd utility.

A quick side note on SD cards. One thing that catches a lot of people out is the read and write speeds. Most cards will show you the read speed, which can be quite high. If you pay close attention to the small print the write speeds aren’t always very high. I went for a card which had pretty high read AND write speeds so that I get the best I/O for my OS. The card I am using is a PNY 32GB Elite-X microSDHC U3 (from around £20), which has read speed of ~90Mbps and benchmarked write speeds between 70 -> 85Mbps. These speeds vary depending on the devices but for it will be suitable for the Pi.

Run the lsblk command to see the current devices, plug your SD card into your Linux machine the run again to get the device name of the SD card

lsblk
NAME                    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sdd                       8:48   1  29.9G  0 disk

If your machine automatically mounts the device you will need to unmount it

umount /dev/sdd

Copy the image file to our SD card. We are using a bytesize of 4M as recommended on the Raspbian site, if this doesn’t work you can try 1M

dd bs=4M if=2017-04-10-raspbian-jessie-lite.img of=/dev/sdd

You can now see that the partitions have been created on the card (a 32GB card may seem like a waste of space but we will come back to that later)

lsblk
NAME                    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sdd                       8:48   1  29.9G  0 disk
├─sdd2                    8:50   1   1.2G  0 part
└─sdd1                    8:49   1    41M  0 part

As of November 2016 Raspbian does not enable ssh by default. This can be an issue if you don’t have a monitor or TV with a HDMI port, or a HDMI cable! We can get around that by mounting the newly created boot partition and adding a file called “ssh”.

mount /dev/sdd1 /mnt
touch /mnt/ssh
umount /mnt

If you are able to plug your Pi into a monitor or TV it is worth watching it boot, always nice to have “eyes on” in case of any errors.

Once this has finished remove the SD card from your machine and plug into the slot on Pi. I will always use ethernet with my Pi, so plug it in and power it up. The first time you boot it is best to leave it for a few minutes. The system does some checks and then boots up. You should have a solid red light and a flashing green light.

There are a couple of ways to find what the IP address is of your Pi. If you have it plugged in to a monitor the IP address will be showing in the boot messages. If, however, you’re attempting a headless setup then you can use nmap or arp. Both are straight forward.

nmap -sn 192.168.0.0/24
arp -n

Connect using ssh. The default user is pi and the default password is raspberry

ssh pi@192.168.0.123

These next few steps depend on your own personal preferences, so feel free to skip/adjust them as necessary.

Create a new privileged user

sudo useradd -g users -G sudo -m -d /home/pyratebeard pyratebeard
sudo passwd pyratebeard
exit

Log back in as your new user and remove the default user pi

sudo userdel -r pi

Change the hostname

sudo hostnamectl set-hostname phishpi

Open up the hosts file and change the last line from

127.0.1.1   raspberrypi

to whatever you changed your hostname to

127.0.1.1   phishpi

Open up the ssh config file

sudo vi /etc/ssh/sshd_config

We’re going to change the following lines (they aren’t listed together)

Port 22
PermitRootLogin without-password
X11Forwarding yes

to

Port 2222
PermitRootLogin no
X11Forwarding no

*you can change the port to whichever one you prefer.

Now restart the ssh daemon

sudo systemctl restart ssh

Keep in mind that when you want to ssh in to the Pi from now on you will need to specify the port, for example

ssh -p 2222 pyratebeard@phishpi

Finally we want to perform an upgrade

sudo apt-get update && sudo apt-get upgrade
sudo reboot

After this you can start installing your favourite terminal apps, and any applications you want to run off your Pi. There are plenty of other system settings you can configure based on your personal preference, I would certainly set up SELinux and do some system hardening relevant to my needs, but that could take up a whole post by itself!

As mentioned at the start, the purpose of my Pi is to run a VPN and a mail server. The upcoming log posts will cover these steps.